Basic Guide 29 th September 2020 
So, you’ve got the Archimedes core (Archie) for MiSTer and downloaded some games or a hard disk image. 
Now what?
First, a little history....
The Acorn Archimedes was a 32bit Computer, predominantly seen in the UK in schools in the late 80’s to 
mid 90’s. The Acorn Archimedes in and of itself is not one single computer, there were several models 
ranging from the BBC Archimedes 305 in 1987 to the A4000 in 1992. Some models had up to 8mb Ram, up 
to 210mb IDE Hard Disk and all had ARM based CPU’s (https://en.wikipedia.org/wiki/Acorn_Archimedes)
This range of computers was well ahead of its time being 32bit Arm based systems using a RISC based 
operating system called RiscOs. Many phones and devices today use ARM and RISC based systems. It was 
predominantly used in educational and industrial settings, but that’s not to say that there wasn’t a good 
home computer scene with many popular games ported to it including renowned names such as Sim City, 
Lemmings, Zool, Pacmania, Speedball 2, Populous, Nebulus, SWIV, James Pond, and of course, Elite.
What do I need for MiSTer?
At the very minimum you’ll need the Archie core, of course, and also a RiscOS ROM. Several versions of 
RiscOS exist including some ‘roll your own’ community ROMs. At time of typing, MiSTer seems to have 
perhaps best compatibility and performance with the RiscOS3.10 Rom (which should be included in the 
pack that this guide is included in). Roms are available here: https://4corn.co.uk/aview.php?sPath=/roms
Accessing the MiSTer Core Menu
Before we go any further, it’s important to note that F12 (often used in MiSTer cores to access the Core 
Menu) has core system  functionality in the Archimedes. For example, it can be used to exit games, or 
within the desktop interface be used to bring up a command prompt. Therefore to access the MiSTer core 
you will need to press the WindowsKey+F12Floppy boot
Though the Archie core and RiscOS Rom will enable you to boot the system, what good is a system without 
Games and Applications?! Archimedes software was predominantly shipped on 3.5” floppy and the MiSTer 
implementation supports the floppy-image file type of ADF (This is not to be confused with the Amiga ADF 
format). Unlike most systems, the Archimedes will always boot (from RiscOS Rom) into its graphical 
desktop interface, even if a disk is inserted at start up.
To launch a disk based game, simply insert the ADF file into floppy drive 0 in MiSTer then single-left-click 
the Drive 0 Icon to display its contents and double-click the game title. Some games were multi-disk and so 
need to be virtually-swapped at the appropriate point or the subsequent disk(s) need to be inserted into 
the second floppy drive.
Hard Disk
However, the Archie core now supports Hard Drive images in the HDF format. Again, there should be a HDF 
image included in the pack that this guide came in. To access the hard disk in MiSTer, simply click the IDE4 
taskbar icon. You can play many of the games found on floppy directly from Hard Disk by simply drag-and-
drop’ing the floppy-disk contents in full to a location on your hard disk. Please note however, that 
copyright checks were sometimes performed requiring the original disk to be inserted in the floppy drive, 
therefore if a game doesn’t launch correctly from hard disk, please insert the floppy disk containing the 
game and try again. In the Hard Disk image mentioned there are Apps and Games folders in the root of the 
disk for simple navigation. Inside the Games folder are 3x further games subfolders Games1 contains 
mostly public domain and freeware type games with a few commercial items. Games2 contains
predominantly commercial games. And ADFFSFlppy contains Virtual Floppy game images.
Virtual Floppy
Some Archimedes games have been archived to a Virtual Floppy format called JFD as part of a project 
called ADFFS. A list of ADFFS (JFD) floppy images can be found here: 
https://forums.jaspp.org.uk/forum/viewforum.php?f=25&start=25
To view the contents of a virtual floppy, first launch the ADFFS application inside the \Games\ADFFSFlppy
directory (also available in the root of \Apps) and an icon will appear on the taskbar. You can then drag-
and-drop a Virtual Floppy image to the ADFFS icon and then simply single-left-click the ADFFS icon to 
display the floppy contents like you would the regular floppy disks/drives inside the Archimedes. You can 
also Middle-Click (more on this below) the ADFFS icon and choose to boot the floppy from the menu 
(among other advanced options). Details on usage of ADFFS can be found here: 
https://forums.jaspp.org.uk/forum/viewtopic.php?f=14&t=323
Giving the middle finger!
One of the ‘quirks’ of the Archimedes as alluded to above is its reliance on the middle-button for many 
operations and bringing up certain menus. If you only have a two-button mouse, you can swap button 2 
and button 3 from the MiSTer Menu. If you have a mouse with a scroll button that doubles as a click-
button, a quick press of this will often act as a middle-button press. Rather than detail when and where 
middle-button usage may be required, I’d advise further reading of either the RiscOS 3 User guide or 
Googling something like ‘RiscOs 3 Middle Button’Help a command window!
As mentioned earlier, pressing F12 inside the Archimedes graphical interface will bring up a command 
interface. You’ll notice a white line at the bottom of the screen with an asterisk after which you can type 
commands. To exit out of this window, simply press Enter/Return and you’ll be returned to the graphical 
interface. 
If the command window appears at boot with a black background, something has gone wrong! However, 
typing ‘desktop’ and pressing return will often resolve this issue and boot back into the Archimedes 
desktop.
My config is messed up, what do I do?
You’ll notice a file inside MiSTer’s \Games\Archie folder called cmos.dat
If you delete cmos.dat the Archimedes configuration will be reverted to defaults. This means that the hard 
drive image will no longer be mounted inside of the Archimedes desktop interface. To remedy this, press 
F12 to open a command interface and type Configure IDEDiscs 1 and press Enter/Return. You’ll need to 
restart the Archimedes. Other settings that will be reverted are desktop wallpaper and the icons on the 
desktop (but not system taskbar icons).
Fast Rebooting the Archimedes
In the event you need to quickly reboot the Archimedes, the fastest way to do this is to simply bring up the 
MiSTer menu and select the Archimedes core again. 
Wait, where are my desktop shortcuts?
So, you’ve worked out that you can drag and drop folders and gam/application icons to the desktop as 
shortcuts, but now you’ve restarted the core, the shortcuts have gone? Well, that’s the way that RiscOS 
works. Unless you save the Boot configuration, your settings will be lost. 
To save your desktop icons, first click the hard disk icon IDE:4 to open the root of the hard disk. Next, 
middle-click the green Acorn icon on the bottom right of the task bar to bring up a menu and go to 
'Desktop boot'. You’ll then see a boot icon and the text ‘!Boot‘ underneath. Drag the boot icon to the root 
of the hard disk. You’ll then need to bring up the Acorn menu again and navigate back to the ‘Desktop 
boot’ option. It will now read idefs::MiSTer.$.!Boot. Ensure that the 'Auto boot' option is ticked and at 
next reboot your desktop icons will be retained. 
Please Note: Booting to the desktop interface via a custom saved !Boot file as detailed above may have a 
significant impact on load times of the desktop.
I saw some screenshots with snazzy wallpaper, how do I get that?
If you thought that setting desktop shortcuts was painful, you don’t even want to know how complex 
creating and setting wallpaper is! It’s well outside the remit of this guide and you’ll need to begin to 
understand RiscOS file type setting and launching/rendering supported image types. 
However, If you simply want to use the MiSTer meets Acorn wallpaper included in the hard disk image, 
first drag it to the desktop area (it’s in the root of the hard disk), thus creating as shortcut. Next, middle-
click the desktop icon shortcut and choose 'Make backdrop' from the menu. Once the backdrop is set you 
can remove the icon from the desktop. Remember to again save the '!Boot' configuration or at the next 
reboot you will lose these wallpaper changes.
Please Note: To repeat - booting to the desktop interface via a custom saved !Boot file may have a 
significant impact on load times of the desktop – more so when a desktop wallpaper has to be rendered.Blah-Blah game/application won’t load, what do I do?
The first thing to do if in doubt is restart the MiSTer core, this is because you will have a nice clean
environment in terms of CPU and Memory registers. If you’ve been opening and closing several 
applications and games without ‘reboot’ then like modern machines, some ‘junk’ can get left behind in 
memory when closed, or a key ‘library file’ left open and unusable until it is closed. Therefore, a reboot 
should be your first port of call.
If after a clean boot the game still doesn’t work, consider inserting the appropriate floppy disk into the 
drive – even if you are booting the game from hard disk. As mentioned earlier, some games perform 
copyright calls back to disk and will fail to work correctly if the original disk is not inserted.
Okay, so you’ve performed a clean boot, you have the disk in the drive and still no dice – now what?
Unfortunately, without further troubleshooting there isn’t a great deal to be done. You may have an 
application that has not been copied to disc correctly, or perhaps other pre-requisite files are not available, 
or the game/application is not compatible with the version of RiscOS you are booting. You could try 
another RiscOS Rom, but your mileage may (will!) vary. As mentioned earlier, there were a number of 
models of Acorn Archimedes and whilst software almost universally works across all models, it is possible 
that MiSTer is not simulating the model that the software requires.
What are the keys? Can I play on joystick?
Most games will be keyboard based, and some will require the mouse.
As for what the keys are per game – you’ll need to look that up on a game-by-game basis. 
In some games the F-Number-Keys are used to select/change game options such as default keys.
Games commonly used Z-Left, X-Right, Space-Fire/Jump, ‘-Up and /-Down
Some games support Serial Joysticks, but irrespective, every game can be made to work with a joystick via 
MiSTer. 
Simply find out the keys for the game, and go through the usual process to map joystick buttons to keys in 
MiSTer by navigating to Button/Key remap for game in the MiSTer menu, and following the instructions
(usually to press a keyboard button, then the corresponding button on your controller (joystick/pad) that 
you wish to represent it).How do I get new software on the Hard Disk?
If you have an ADF floppy image of the software you want – great! Simply follow the earlier instructions 
regards drag-and-drop’ing the files to the hard disk and launching from there.
If you are downloading files from the Internet and wish to move them across to the hard disk image, you 
will probably need an Archimedes emulator to mount the hard disk within Windows (emulators for other 
operating systems outside the remit of this guide). 
The emulator Arculator v0.99 seems to supports the same hard disk format as used in MiSTer and allows 
mounting/dismounting between MiSTer and itself without corruption the disk (as I’ve seen in other 
emulators or versions). The Articulator directory within Windows contains a ‘FS’ subfolder that appears
inside your virtual Archimedes as a volume names ArculFS. You can save files in the Windows ‘FS’ folder 
and then drag and drop them from ArculFS to your Archimedes hard disk. 
Please note that RiscOS uses extended file attributes that designate the file type. You will need to become 
familiar with how this works and how to tell the Archimedes what the file types are or else any files you 
copy across will be interpreted as text. 
As an example, assuming you’re copying JFD virtual-floppy archives, first launch ADFFS to enable the floppy 
file type to be recognised. Next, simply copy the ‘text’ file to your Archimedes hard disk and middle-click
the icon to bring up the Filer menu. Navigate to set the file type from the menu as ‘Floppy’. If successful 
the icon will change and you can use the JFD file natively within the Archimedes (graphical example of this 
on the next page). 
Please also note that in addition, filenames with ampersands (&) and spaces are not allowed and neither 
are long filenames so please be sure to rename your files within Arculator’s FS directory first. If you make 
changes to the contents of the Arculator FS subfolder, simply close any ArculFS Winows on your 
Archimedes and re-open them.Example of using Arculator v0.99 to copy content to the Archimedes hard disk and make 
usable:
Below you can see that ADFFS is launched, a folder on the MiSTer hard disk called ‘MyStuff’ has been 
created and the file KrsColTrmx has been copied across from the ArculFS volume. Middle-clicking the hard
disk based icon (Important: not the ArculFS one), the Filer menu appears. From the Filer menu, the file 
type is set to floppy. Without ADFFS loaded, setting this file type will fail as the operating system will not 
recognise the file type.
Below you can see that after setting the file type, the icon has changed from text to an associated file type 
which in this case is a virtual floppy image. As such, the contents can then be browsed
Is there anything else I need to know?
Probably! Well, okay, maybe not. If you’re casually looking at this core and its software the above should 
be enough to get you going. If you want to find out more, I’d suggest asking the MiSTer community, 
reading up on RiscOS (you’ll get more/better Internet search results usually by using the term ‘RiscOs’ than 
‘Archimedes’ if trying to do something like find a configuration option or perform file system activities), or 
browsing popular Archimedes Forums.
One final thing of note, if something doesn’t look/sound right please try the same game via an existing 
emulator to see if it performs the same. If it doesn’t please log this with the MiSTer development team to 
help them improve the core
Good luck! I hope this guide has been helpful and you enjoy the 
Acorn Archimedes!